background image

2

You can be killed or seriously injured if you don't immediately 
 

You can be killed or seriously injured if you don't follow 

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

DRYER SAFETY .......................................................................... 2

INSTALLATION REQUIREMENTS .............................................. 4

Tools and Parts .......................................................................... 4
Location Requirements.............................................................. 5
Electrical Requirements ............................................................ 6
Gas Supply Requirements ........................................................ 7
Venting Requirements .............................................................. 8

INSTALLATION INSTRUCTIONS – GAS DRYER .................. 10

Install Coin Slide and Coin Box................................................10
Make Gas Connection ..............................................................10

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

It is recommended that the owner post, in a prominent location, instructions for the customer's use in the event the customer smells
gas. This information should be obtained from your gas supplier.

Post the following warning in a prominent location.

INSTALLATION INSTRUCTIONS – GAS DRYER .................. 10

Connect Vent ............................................................................10
Complete Installation ..............................................................10

INSTALLATION INSTRUCTIONS – ELECTRIC DRYER........ 11

Install Coin Slide and Coin Box................................................11
Make Electrical Connection......................................................11
Connect Vent ............................................................................15
Complete Installation ..............................................................15

CHANGING TO A 30- OR 60-MINUTE TIMING CAM ...........16

DRYER SAFETY

TABLE OF CONTENTS

Содержание CEM2940TQ

















Отзывы: