COMPONENT ACCESS
Whirlpool 2014 CABRIO
®
Direct Drive Washer
n
4-3
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
Removing the Console—Method A
The new sleek contoured design of the User Interface makes
access of the console a bit of a challenge. Since the console is
recessed into the top panel (see Figure 1), the usual method
of sliding a tool under the console to release the clips can be a
bit tricky.
Figure 1
Modify the Putty Knife
A putty knife can work, but it should be plastic and modified
as shown in Figure 2 so that it can be maneuvered around the
screw, which is placed directly in front of the release clips.
2¾
”
½
”
Figure 2
1.
Unplug washer or disconnect power.
2.
Turn off water supply to washer.
3.
Remove two (2) 1/4” hex-head mounting screws from the
rear of the console as indicated in Figure 3.
Figure 3
4.
Slide the putty knife down between the console assembly
and top panel. Use your free hand to push back on the
top of the console while you flex and maneuver the putty
knife up and around the screw. (See Figures 4 & 5).
Figure 4
5.
Depress the console clip with the putty knife and lift up on
the console to separate from top panel (see Figure 5). Tilt
the console forward for service.
Console Clip
Shock Mount Screw
Figure 5
New recessed
console design
Console Assembly
Top Panel
