Whirlpool AWV07000R, Инструкция по технике безопасности и эксплуатации, руководство по установке и информация о регистрации гарантии в интернете

Страница: 9 / 45

Installation procedure:
Use iron support
The installation hole should be strong enough to
support the air conditioner. If it cannot, iron
sup
port
has to be used outdoors.
Iron support should be fixed on the building (Shown at
right figure.)
Use sunshade board
Air conditioner should avoid anything to be dropped into it
and avoid direct sunshine. If there is no cover on it, you
should contact the seller for installing the sunshade
board. When installing the sunshade board, don’t let it
block the air inlet at the side grille.
6
Installation Instruction
Remove the sticker from the front panel. 1)
3)
2)
Fill up sews in the cabinet with sponge or foam.
Put the unit into the installation hole.
For 7K & 9K
:
Wall
Sunshade
board
Rubber
plate
Support
Horizontal line
Installation assistance:
Wall
Sunshade
board
Rubber
plate
Horizontal line
6-10mm
Support
For 7K & 9K
:
3)
1)
2) Remove the sticker from the front panel.
Put the unit into the installation hole.
When installing the unit, it should be slante d down to the back to
avoid the enlargement of
noise or vibration.
(Slant between 6-10mm.)
(
Shown at right figure.)
The installation place should be strong enoug h to avoid the
enlargement of noise or vibration.
Fill up sews in the cabinet with sponge or foam.
For 12K & 18K
:
For 12K & 18K
:
When installing the unit, it should slant down to the back to make
sure the condensation water can be drained awayconveniently.
The installation place should be strong enough to avoid the
enlargement of noise or vibration.
-
3
。
+1
。
(Slant about )
-
3
。
+1
。
(Shown at right figure.)