background image

108

CARE AND MAINTENANCE

Appliance exterior and control panel

•

Clean using normal household cleaner (do not 

use abrasive products and no solvents).

•

Dry with a soft cloth.

Door seal

•

Clean with a damp cloth when necessary.

•

Check the condition of the door seal periodically.

Filter

•

Check and clean the filter two or three times a 

year (see “Removing the Filter”).

Detergent dispenser

1.

Disengage the detergent dispenser by pressing the release lever in 

the prewash compartment and extract it

.

2.

Remove the siphon from the softener and bleach compartment.

3.

Wash all the parts under running water.

4.

Reposition the siphon and refit the detergent dispenser.

Water hose mesh strainer

Check and clean periodically.

For machines with a straight water supply hose

1.

Turn off the tap.

2.

Unscrew the hose from the tap.

3.

Clean the internal strainer.

4.

Screw the supply hose back onto the tap.

5.

Unscrew the hose from the appliance.

6.

Remove the filter from the washing machine with pliers and clean 

it.

7.

Refit the filter and screw the hose connection to the appliance.

8.

Turn on the tap and 

ensure that the connections are completely 

water-tight.

Downloaded From WashingMachine-Manual.com Manuals

Содержание AWG 860















Отзывы: