102
FIRST WASH CYCLE
PRECAUTIONS AND GENERAL RECOMMENDATIONS
1.Packing
The packing material is recyclable as indicated by
the recycling symbol
. Adhere to local
regulations when disposing of packaging material.
2.Energy saving tips
Achieve the best use of energy, water, detergent and
time by using the recommended maximum load size.
Do not exceed manufacturers recommended
dosages as shown on the detergent package.
The Eco Flap - a special system in the outlet -
will prevent detergent loss from the drum to
avoid detergent loss into the environment.
Use Prewash for heavily soiled laundry only!
Save detergent, time, water and energy
consumption by not selecting Prewash for slight
to normally soiled laundry. You save on water,
energy and time as a result.
Pretreat stains with stain remover or soak dried in
stains in water before washing to reduce the
necessity of a hot wash program.
Save energy by using a 60° C instead of a 90° C
wash programme or a 40° C instead of a 60° C
wash programme.
Save energy and time by selecting a high spin
speed to reduce the water content in laundry
before using a drying programme (for machines
with adjustable spin speed).
3.Disposing of packaging and old appliances
The washing machine is built from reusable
materials. Dispose of the appliance in
conformity with environmental regulations.
Before scrapping, cut off the power cable so that the
washing machine cannot be connected to the mains.
Remove detergent from compartment if you
intend scrapping your appliance.
4.Child safety
Children must not be allowed to play with the
washing machine.
5.General recommendations
When the appliance is not in use unplug it and
turn off the tap.
Before cleaning or carrying out maintenance
switch off the washing machine and disconnect
it from the mains supply.
To clean the outside of the washing machine,
use a neutral detergent and a damp cloth.
Do not use abrasive detergents.
Do not attempt to force the door open.
If necessary, the power cable may be replaced
with an identical one obtained from our After-
Sales Service. The power cable must only be
replaced by a qualified technician.
6.EC Declaration of Conformity
This washing machine has been designed,
constructed and distributed in compliance with
the safety requirements of EC Directives:
73/23/EEC Low Voltage Directive
89/336/EEC Electromagnetic Compatibility
Directive
93/68/EEC CE Marking Directive
.
This initial cycle without laundry serves to eliminate any water remaining after your appliance was
tested at the factory.
1.
Open the tap.
2.
Close the door.
3.
Pour a small amount of detergent (about 30 ml)
into the detergent dispenser.
4.
Select a short programme (see programme chart).
5.
Press
On/Off
button
.
Downloaded From WashingMachine-Manual.com Manuals
