WHIRLPOOL PRODUCTS DEVELOPMENT LTD. SERVICE MANUAL
Ref no: 58558791 Page 8 of 19
All lockseams
Weld at bottom
Bottom plate
Oven foot
5.
Pull the door to the position at which the oven is just about to turn off due to
the interlock switch action, scan the door perimeter for microwave leakage.
6.
Maximum allowable leakage is 1 mW/cm
2
.
7.
Record all data.
5.2.3
OVEN LEAKAGE REPAIR
If leakage figure is found to be above 5 mW/cm
2
, owner should be told not to use
the oven until it has been serviced. Service personnel should notify the
manufacturer and CDRH (FDA) immediately.
5.2.4
OPEN DOOR TEST
With the oven in operation state, open the oven door and check if the oven is still
operating. If so, the service personnel should tell the owner not to operate the
oven again and should notify the manufacturer and CDRH (FDA) immediately.
