Whirlpool AS09, Инструкция пользователя

Страница: 8 / 23

FAN
MODE
TIM
ER
O
N
CLO
CK
TIM
ER
O
FF
S
LE
E
P
S
W
IN
G
ON ON
OFF OFF
th
sense
LOC
K
Each time MODE button is pressed, the operation mode
is changed in sequence:
Each time the "FAN" button is pressed, the fan speed is
changed in sequence:
18 ~32
Heating mode is NOT available for cooling only air conditioner.
HEATING COOLING DRY FAN ONLY
Selecting mode
FAN mode
Auto
High Medium
Low
At "FAN ONLY" mode, only "High","Medium" and "Low" are available.
At "DRY" mode, Fan speed is set at "Low" automatically, "FAN" button
is ineffective in this case.
Setting temperature
Press once to temperature setting by 1 lower
Press once to temperature setting by 1 raise
Range of available set temperature
*HEATING, COOLING
DRY
FAN
unable to set
unable to set
Turning on
SWING, 6th sense, TIMER ON, TIMER OFF, CLOCK, SLEEP and Jet operation modes will be
specified in the following pages.
Press button, when the appliance receives the
signal,
the RUN indicator of the indoor unit lights up.
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
Wait 3 minutes before restarting the appliance.
During heating operation, air flow is not discharged at the beginning. After 2 5 minutes, the air flow will be discharged
until temperature of indoor heat exchanger rises.
ONLY
Operation instructions
7
Operation modes
*Note: Heating mode is NOT available for cooling only models.
2
3
1
4