22
•
Install the appliance away from heat sources.
•
Install the appliance in a dry, well-ventilated place.
•
Make sure that the appliance is level.
Adjust the front feet if necessary.
•
Leave at least 5 cm clearance above the
appliance.
•
In some models, the sides project to the rear so the
appliance can be placed in direct contact with the
rear wall.
Alternatively, fit the spacers (if supplied) on the
upper part of the condenser at the rear of the
appliance. For models without projecting sides, the
distance between the appliance and rear wall must
be at least 4.5 cm.
•
Clean the inside (see “Cleaning the Appliance”).
•
Fit the accessories supplied.
•
Remove the compressor fixing block (if supplied).
Electrical connection
•
Electrical connections must be made in
accordance with local regulations.
•
Ensure that the voltage indicated on the appliance
rating plate corresponds to the domestic supply
voltage.
•
Appliance earthing is
compulsory by law.
The Manufacturer declines all liabilities for
injury to persons and animals or damage to
property resulting from failure to observe
these regulations.
•
If the plug and socket are not of the same type,
have the socket replaced by a qualified electrician.
•
Do not use extension cables, multiple sockets or
adapters.
INSTALLATION
33056-GB.fm5 Page 22 Saturday, January 16, 1999 8:47 AM
Downloaded from Fridge-Manual.com Manuals
