Whirlpool AKZ 312 WH Скачать руководство пользователя страница 4

18

Connecting the oven to the power supply

Make sure that the voltage shown on the rating 
plate is the same as the power supply voltage in 
your home. The rating plate is on the front edge of 
the oven cavity (visible with oven door open).

Use a type H05RR-F power cord (minimum 
length 800 mm).

Warning: All the oven’s components operate at 
230-240 V. When using a 400 V connection, 
make sure that the voltage reaching the oven is 
230-240 V, as illustrated in the side table.

Interconnecting cooktop and oven

Before connecting the oven to the power supply, 
check that the cooktop is among the ones listed in 
the cooktop/oven pairing product sheet.
Connect the 3 pole and 4 pole connectors to the 
respective connectors on the oven. 

The 3 pole connectors (H) is located at the rear 
right hand side of the control panel, the 4 pole 
connector (J) is located at the top of the oven in the 
left hand corner (see figure).

Connect the yellow/green striped earth wire (

(K) from the cooktop to the screw located near the 
3 pole connector.
WARNING: DO NOT CONNECT TO THE 
POWER SUPPLY BEFORE YOU HAVE 
FINISHED CONNECTING THE OVEN AND 
COOKTOP.

Mount the oven in the kitchen unit. 
Make sure the power cord is not trapped.

ELECTRICAL CONNECTION

Conductors X 
number

Connection

1N+  

~

H05 RR-F 3X4 mm²

2N+  

~

H05 RR-F 4X2.5 mm²

3 +    

~

H05 RR-F 4X2.5 mm²

3N+  

~

H05 RR-F 5X1.5 mm²

Make sure the appliances are installed 
and connected to the electricity supply by 
a qualified technician in accordance with 
the manufacturer’s instructions and in 
compliance with local regulations.

The installer is responsible for the correct 
electrical connection of the appliances 
and the observance of the relative safety 
regulations.

The appliance must be connected to the 
electricity supply by means of an all-pole 
disconnect switch with minimum contact 
gap of 3 mm.

The appliances must be earthed by law.

Do not use multiple plug adapters or 
extension leads.

After the appliances have been installed, 
the electrical components must be 
inaccessible.

53963-gb.fm5  Page 18  Tuesday, March 13, 2001  7:28 PM

Содержание AKZ 312 WH













Отзывы: