Whirlpool AKZ 151 IX Скачать руководство пользователя страница 8

10 

Oven not working

Switch the oven off and then on again to see if 
the problem persists.

Check for the presence of mains electrical 
power.

Check that the oven selector is not on position 
“0”
.

If the electronic display shows the message 
“STOP”, press the button 2 to reset the oven 
and then set the clock (see the Programmer 
Description Sheet supplied separately).

If the electronic display shows the message 
“Fxx”, contact the After Sales Service, quoting 
the error code displayed.

Before contacting After Sales Service:

1. Try to solve the problem 

(see “Troubleshooting guide”).

2. Turn off the appliance and restart it to see if the 

fault is repeated.

If after the above checks the fault still occurs, 
get in touch with the nearest After Sales 
Service.
Please give:

the nature of the problem.

the exact type and model.

the service number (number after the word 
Service on the rating plate), located on the right 
hand edge of the oven cavity (visible when the 
oven door is open). The service number is also 
indicated on the guarantee booklet.

Your complete address (including postal code) 
and phone number.

If any repairs are required, please contact an 
authorised customer service centre,
 as indicated 
in the warranty.
In the unlikely event that an operation or repair is 
carried out by an unauthorised technician, always 
request a certification of the job carried out and 
insist on the use of original spare parts.
Failure to comply with these instructions may 
compromise the safety and quality of the 
product.

These appliances are designed to come into 
contact with foodstuffs and they are constructed 
in compliance with Directive 
89/109/EEC.

The appliances are designed solely for use as a 
domestic cooking appliances. Any other use of 
the appliances (e.g. for room heating) is 
considered as improper use and potentially 
dangerous.

These appliances are designed, built and sold 
in compliance with:
- the safety requirements of “Low Voltage” 

Directive 73/23/EEC.

- the protection requirements of EMC 

Directive 89/336/EEC;

- the requirements of Directive 93/68/EEC.

TROUBLESHOOTING GUIDE

AFTER SALES SERVICE

DECLARATION OF CONFORMITY CE

53734agb.fm5  Page 10  Monday, August 27, 2001  6:35 PM

Содержание AKZ 151 IX









Отзывы: