![Whirlpool AKZ 151 IX Скачать руководство пользователя страница 7](http://html.mh-extra.com/html/whirlpool/akz-151-ix/akz-151-ix_manual_435885007.webp)
9
•
When you finish cooking; wait for the oven to
cool and then clean it to prevent the build-up of
baked-on residues.
•
If the food residues are baked on, use a specific
oven cleaner and follow the manufacturer’s
instructions on the pack.
•
Clean the exterior of the oven with a sponge
and warm water.
•
Do not use abrasive cleaners or pan
scourers.
•
Use a liquid detergent to clean the oven door
window.
•
Wash the accessories in a dishwasher or in the
sink, using an oven cleaner.
•
After the oven has been in prolonged use and
when cooking on different levels (especially
food with high water contents such as pizzas,
stuffed vegetables, etc.) condensation may
form on the door and on the inside of the door
seal: when the oven is cool, dry any
condensation with a cloth or sponge.
Removing the oven door (for cleaning)
1. Open the oven door.
2. Press hinge catches (A) forwards.
3. Lift the catches until they engage and then
remove the door.
4. Important: While you are cleaning the oven,
ensure you do not disengage the hinge
retainer catches.
5. Refit the oven door by following the above steps
in reverse order.
To clean the oven roof, pull out the grill
element (if fitted) and lower it as far as it
will go.
•
Do not attempt to clean the oven until it is cool.
1. To clean the oven roof, pull out the grill element
and lower it as far as it will go.
2. Clean the oven roof and then return the grill
element to its original position.
Changing the oven lamp
1. Disconnect the oven from electrical supply.
2. Unscrew the lamp cover.
3. Change the lamp (see N.B.).
4. Refit the lamp cover.
5. Reconnect the electrical supply.
Changing the lateral lamp
(depending on model)
1. Disconnect the oven from electrical supply.
2. Remove the left hand side grid.
3. Using a screwdriver, prize off the lamp cover.
4. Change the lamp (see N.B.).
5. Reposition the lamp cover and press it against
the oven wall until it clicks into place.
6. Refit the side grid.
7. Reconnect the electrical supply.
N.B.: Use exclusively 25 W 230 V lamps, type
E-14, T300°C, available from After Sales Service.
CLEANING THE OVEN AND ITS ACCESSORIES
53734agb.fm5 Page 9 Monday, August 27, 2001 6:35 PM