Whirlpool AKR6152IXDS-C, Инструкция по эксплуатации

Страница: 7 / 16

7
The filters may also be washed in the dishwasher.
Before removing the filters, you should remove the outside filter first, then
pull the slide-out shell to the farthest distance position prior to removing the
inside filter.
When installing the filters, install the inside filter first with the slide out shell
in the farthest distance position, and then install the outside filter.
The aluminum panels may alter in color after several washes. This is not
cause for customer complaint nor replacement of panels�
Clean the fan and other surfaces of the cooker hood regularly using a cloth
moistened with denatured alcohol or non abrasive liquid detergent.
Troubleshooting
Problem Possible reason Solution
Hood doesn't work
No electricity supply
Check the olua is connected
Check that the main switch/
circuit breaker/safety switch is
turned on
Rangehood is folded
closed
Unfold the pull-out shell
Poor airflow
Aluminum grease
filters clogged
Clean the filters and replace
when dry
Motor running but
no airflow
Butterfly valve
jammed
Contact service department
Motor turns off after
a few minutes
High temperature
safety device
activated
The kitchen is not sufficiently
ventilated
The hood is installed
too near to the
cooking stove
The hood must be at least
650mm from stove
Oil dripping onto
stove
Aluminum grease
filte rsaturated
Wash the aluminum grease
filters
Whirring sound
Something in
contact with fan
blade
Contact service department