background image

17

Before cleaning or carrying out maintenance, 
switch off the appliance, disconnect the mains 
plug and turn off the water tap.

Cleaning the outside of the appliance:

To clean the outside of the appliance, use a 

neutral detergent and a damp cloth. To clean 
the control panel, use only a slightly damp 
cloth.

Do not use abrasive detergents.

Cleaning the inside of the dishwasher:

Regularly wipe the door seal and inside of 
the door with a damp cloth to remove any 
food residue.

Upper spray arm (A):
1. To remove the upper spray arm, extract the 

basket and unscrew the upper spray arm by 
turning it to the right. Extract the spray arm by 
pulling it downwards.

2. Rinse the nozzles under running water; 

remove any obstruction in the holes.

3. Remount the spray arm by aligning it with the 

rotary mounting and rotate it completely to the 
left as far as it goes (click should be heard).

Make sure the spray arm rotates freely.

Lower spray arm (B):
1. Remove the lower basket and then lift off the 

arm.

2. Rinse the nozzles.
3. Remount the spray arm by aligning it with the 

rotor pin and insert it.

4. Push the spray arm down until it is fixed in 

place (click should be heard).

5. Make sure the two levers are correctly 

inserted (they should click).

Make sure the spray arm rotates freely.

Cleaning the filters (C):
The filters (coarse, fine and main plastic or metal 
filter) are utilized to prevent large food remains or 
other objects from clogging the pump.
Filters should be cleaned periodically to remove 
the collected food remains and others.
1.   Turn the wide-mesh and fine-mesh filter unit 

anti-clockwise and remove it from the main filter.

2. Remove the main filter too.
3. Remove the fine-mesh filter from the 

wide-mesh filter (see figure) and wash them. 
Clean the main filter with a soft brush.

4. Reassemble: replace the main filter.

Replace the fine-mesh filter into the wide-
mesh one and fix the filter unit down into the 
main filter by turning it completely to the right.

5. Make sure the filters have been inserted and 

secured correctly.

Do not operate the dishwasher without 
filters and check that the filter unit is 
correctly assembled to ensure good 
wash results.

CARE AND MAINTENANCE

Содержание ADP 253 WH









Отзывы: