background image

GB -3-

Daily check

3

Check the rinse aid indicator to check the level 
into the dispenser.

(depending on the model)

Rinse aid indicator on the control panel

Rinse aid indicator on the dispenser

The indicator lamp lights up when RINSE AID NEEDS 
TO BE ADDED.

dark: OK.

clear: NEEDS TO BE ADDED

Only use rinse aids recommended for use in domestic dishwashers. Immediately wipe away any rinse aid spilt accidentally. This prevents the formation of excess suds which can cause a fault function of the 
appliance.

If there are streaks: reduce the dosage by turning the dial to a lower setting (1-3). If crockery is not perfectly dry: increase the dosage by turning the dial to a higher setting (5-6). Plastic dishes have more difficulty 
drying and a higher rinse aid setting will not improve the situation.

Detergents with rinse aid incorporated may be effective only with longer programmes. In the case of shorter programmes, detergent residue may be a problem (if necessary, use powder detergent). Detergents 
with rinse aid incorporated tend to form excess suds.

Daily use

Adding detergent - Use only detergent specifically for dishwashers in accordance with the supplier’s recommendations

Open the cover A 

(press the dedicated button).

Only fill the 
detergent dispenser 
prior to starting a 
wash programme.

Shut the cover 

by pressing dedicated ribs.

Insert detergent: Tablet / powder / liquid into the big chamber

Use only one tablet per one cycle, only 
placed in detergent dispenser.

All types of tablets can be used, but for 
2 in 1 type adding of salt is mandatory.

If required, 
open the 
cover B 
(press the 
dedicated 
button).

Add rinse aid 
to the max. 
line ~150 ml

The rinse aid dosage can be 
adjusted to the detergent used. 
The lower the setting, the less 
rinse aid is dispensed (factory 
setting: position 4).
Press the button to open the 
cover B. Using a coin or similar 
object, turn the arrow to the 
desired setting. After adjusting 
the rinse aid setting, shut the 
cover again.

Visual 
indicator

2

Adding rinse aid (not necessary when you use tablets). How to adjust the rinse aid dosage regulator

Содержание ADP 2315 WH









Отзывы: