background image

13

For Great Britain Only

Warning

 - this appliance must be 

earthed

Fuse replacement

If the mains lead of this appliance is fitted with a 
BS 1363A 13amp fused plug, to change a fuse in 
this type of plug use an A.S.T.A. approved fuse 
to BS 1362 type and proceed as follows:

1. Remove the fuse cover (A) and fuse (B).

2. Fit replacement 13A fuse into fuse cover.

3. Refit both into plug.

Important:
The fuse cover must be refitted when changing a 
fuse and if the fuse cover is lost the plug must not 
be used until a correct replacement is fitted.
Correct replacement are identified by the colour 
insert or the colour embossed in words on the 
base of the plug.
Replacement fuse covers are available from 
your local electrical store.

Connection to a rewirable plug

If the fitted plug is not suitable for your socket 
outlet, then it should be cut off and disposed of in 
order to avoid a possible shock hazard should it 
be inserted into a 13A socket elsewhere.
A suitable alternative plug should then be fitted 
to the cable.

The wires in the mains lead are coloured in 
accordance with the following code:
BLUE - “NEUTRAL” (“N”)
BROWN- “LIVE” (“L”)
GREEN AND YELLOW - “EARTH” (“E”)

1. The GREEN AND YELLOW wire must be 

connected to the terminal in the plug which is 
marked with the letter “E” or by the Earth 

symbol 

 or coloured green or green and 

yellow.

2. The BLUE wire must be connected to the 

terminal which is marked with the letter “N” or 
coloured black.

3. The BROWN wire must be connected to the 

terminal which is marked with the letter “L” or 
coloured red.

For the Republic of Ireland only

The information given in respect of Great Britain 
will frequently apply, but a third type of plug and 
socket is also used, the 2-pin, side earth type. In 
this case, the wire which is coloured GREEN 
AND YELLOW must be connected to the EARTH 
contact, and the two wires to the two pins, 
irrespective of colour. The supply to the socket 
must be fitted with a 16 amp fuse.

ELECTRICAL CONNECTION

Downloaded from DishWasher-Manual.com Manuals

Содержание ADG 6556 WH









Отзывы: