Whirlpool ACH09000R, Инструкция по безопасности, эксплуатации и установке

Страница: 17 / 96

14
Introduction for buttons on remote controller
@! %
!! !
to avoid detecting inaccurate ambient temperature.
TIMER ON button
†#*>`„'‚†!!=††
†'‚†!@††
††#*>`„'‚
For on
††††
#*>`„'‚ ‡!ƒ††††
later, the time will change quickly until reaching your required time.
@†#*>`„'‚†!# †'‚† ††
resumes displaying. Cancel TIMER ON: Under the condition that TIMER ON is
†#*>`„'‚†
TIMER OFF button
†#*>`„'QQ†!!=††
†'QQ†!@††
††#*>`„'QQ
For on
††††
#*>`„'QQ ‡!ƒ††††
later, the time will change quickly until reaching your required time.
@†#*>`„'QQ† †'QQ† ††!
Cancel TIMER OFF. Under the condition that TIMER OFF is started up, press
†#*>`„'QQ†
Under on
or
off status, you can set TIMER OFF or TIMER ON simultaneously.
Z#*>`„'‚#*>`„'QQ!
After starting up TIMER ON or TIMER OFF, set the constant circulating valid.
After that, air conditioner will be turned on or turned off according to setting time.
ON/OFF button has no effect on setting. If this function
is not needed
, please use
remote controller to cancel it.
Clock time adopts 24-hour mode.
The interval between two operation can't exceeds 5s. Otherwise, remote controller
will quit setting status. Operation for TIMER ON/TIMER OFF is the same.
TIMER ON / TIMER OFF button
Note:
@!††! @
†††† ‘!
For e
††††
! ‡!*††††
time will change quickly. Release th
e
button when reaching your required time.
@†J'ˆ†!!††
Note:
CLOCK button