10
11
Refrigerator Leveling &
Door Adjustment
(If needed)
The refrigerator must be level in order to maintain
optimal performance and desirable front appearance.
(If the floor beneath the refrigerator is uneven, the
freezer and refrigerator doors look unbalanced.)
In case freezer door is lower than
refrigerator door...
Insert a screw driver
(flat tip) into a groove of
the left wheel (bottom
of freezer) and turn it
clockwise until the door
is balanced. (Clockwise
to raise freezer door,
counterclockwise to
lower.)
※
If the freezer door is not balanced by step 1, then
follow the next steps.
Open the doors, unscrew
the front cover and
remove, if it is attached.
Insert a spanner (A part) into the hinge nut (1 part)
and unscrew the nut by turning clockwise.
Insert a spanner (B part) into the hinge nut (2 part)
and turn clockwise to lower the door.
If the door is aligned, fasten the nut (1) tightly by
turning counter-clockwise.
In case refrigerator door is lower than
freezer door...
Insert a screw driver (flat
tip) into a groove of the
right wheel (bottom of
refrigerator) and turn it
clockwise until the door
is balanced. (Clockwise to
raise refrigerator door,
counterclockwise to lower.)
※
If the refrigerator door is not balanced by step 1, then
follow the next steps.
Insert a spanner (A part) into the hinge nut (1 part)
and unscrew the nut by turning clockwise.
Insert a spanner (B part) into the hinge nut (2 part)
and turn counter-clockwise to tighten the door.
If the door is aligned, fasten the nut (1) tightly by
turning.
Front Cover
After installation and/or door leveling, fasten front
cover with screws. (Remove the screws on the front
bottom panel first. Click and screw the cover.)
Caution
● The front of refrigerator needs to be just
a little higher than the back for easy door
closing, but if the wheel is raised too much for
door balance, i.e. the front of refrigerator is
much higher than the back, it can be difficult
to open the door.
1
2
2
1
3
3
4
4
5
X603-13(영)_9S22FNI_IX(월풀).indd 10
2017-01-10 오후 1:53:02
