8
2. To wire through top:
Mark a line 7½" (19.0 cm) from the right of the centerline on
the underside of the cabinet. Mark the point on this line that is
2" (5.0 cm) from back wall. Drill a 1¼" (3.0 cm) diameter hole
through the cabinet at this point.
To wire through rear wall:
Mark a line 7½" (19.0 cm) from the right of the centerline on
the wall. Mark the point on this line that is ¾" (1.9 cm) from
underside of cabinet. Drill a 1¼" (3.0 cm) diameter hole
through wall at this point.
Style 1 - Cut Openings for 3¼" x 10" (8.3 cm x 25.4 cm)
Rectangular Vent System
Roof Venting
To make a 4" x 10½" (10.2 cm x 26.7 cm) rectangular cutout
on the underside of cabinet top and bottom:
1. Mark lines 1½" (3.8 cm) and 5½" (14 cm) from the back wall
on the centerline of the underside of cabinet.
2. Mark lines 5¼" (13.3 cm) to the right and left of the centerline
on the underside of cabinet.
3. Use saber or keyhole saw to cut a rectangular opening for
vent.
4. Repeat steps 1-3 for the underside of the top of the cabinet
Wall Venting
To make a 4" x 10½" (10.2 cm x 26.7 cm) rectangle in the wall:
1. Make 2 lines by measuring from floor 65
⁷⁄₈
" (167.3 cm) and
62
³⁄₈
" (158.4 cm) or
¹⁄₈
" (3.2 mm) and 3
⁵⁄₈
" (9.2 cm) down from
underside of cabinet and mark on the centerline on the back
wall.
2. Mark lines 5¼" (13.3 cm) to the right and left of the centerline
on the wall.
3. Use saber or keyhole saw to cut a rectangular opening in the
wall for the vent.
Style 2 - Cut Openings for 3¼" x 10" (8.3 x 25.4 cm)
Rectangular Vent to 6" (15.2 cm) Round Vent Transition
Roof Venting
To make a 4" x 10½" (10.2 x 26.7 cm) rectangular cutout on the
underside of cabinet bottom:
1. Mark lines 1½" (3.8 cm) and 5½" (14 cm) from the back wall
on the centerline of the underside of cabinet.
2. Mark lines 5¼" (13.3 cm) to the right and left of the centerline
on the underside of cabinet.
3. Use saber or keyhole saw to cut a rectangular opening for
vent.
To make a 6
¹⁄₄
" (15.9 cm) circle on the underside of the cabinet
top:
1. Mark a centerline on the underside of the top of cabinet.
2. Mark a line 4
³⁄₄
" (12.1 cm) from the back wall on the underside
of the top of cabinet.
3. Draw a circle using a compass or 6
¹⁄₄
" (15.9 cm) circle
template.
Centerline
2" (5.1 cm)
from wall,
not cabinet
frame
7
¹⁄₂
"
(19 cm)
7
¹⁄₂
"
(19 cm)
Centerline
³⁄₄
" (1.9 cm)
5
¹
/
₄
"
(13.3 cm)
5
¹
/
₄
"
(13.3 cm)
*5
¹
/
₂
"
(14 cm)
*From wall, not cabinet frame
Cabinet cutouts
*1
¹
/
₂
" (3.8 cm)
¹⁄₈
"
3 ⁵⁄₈
"
Cabinet
front
5
¹⁄₄
"
(3.2 mm)
(9.2 cm)
(13.3 cm)
Centerline
5
¹
/
₄
"
(13.3 cm)
5
¹
/
₄
"
(13.3 cm)
*5
¹
/
₂
"
(14 cm)
*From wall, not cabinet frame
*1
¹
/
₂
" (3.8 cm)
