4
Door Removal, Leveling, and Alignment
Gather the required tools and parts and read all instructions before starting installation. Save these instructions for future reference.
NOTE:
Before moving your product into your home, measure the doorway of your home to see whether you need to remove the
refrigerator and freezer doors. If door removal is necessary, see the instructions below.
IMPORTANT:
Before you begin, unplug refrigerator or disconnect power. Remove food, the ice storage bin (on some models), and any
adjustable door or utility bins from doors.
TOOLS NEEDED:
Bubble level; flat-blade screwdriver; 5/16" and 11/16" wrench; 1/4", 3/8", and 5/16" hex-head socket wrenches,
Phillips screwdriver tip #2 with 4" long as minimum, TORX
†
T30 screwdriver.
WARNING
Electrical Shock Hazard
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
9
10
11
3
2
12
7
6
5
A
C
B
4
A
A
A
1
8
A
Top Left Hinge
Door Removal
Top Right Hinge
Left and Right Bottom Hinge
Wiring
Water Dispenser
Tubing
Full Refrigerator
Base Grille
Water Filter Door and Base Grille
Alignment Screw
Locking Nut
Leveling screws
Do not remove A screws
Do not remove A screws
Do not remove B screws
A. Wiring plugs
B. Wiring clip
C. Grommets
A. Face of fitting
A. Pull to the right for extraction
B. Twist and pass underneath door
Pull toward you.
Phillips screws
Lower
Raise
5/16"
wrench
Loosen
Tighten
11/16"
wrench
Raise
Lower
Lower
Raise
Cabinet
Freezer
door
Adjustable front wheels
Water
filter door
Base
grille
Refrigerator
door
†
TORX and T30 are trademarks of Acument Intellectual Properties, LLC.
