12
Lights
When the indoor light becomes damaged, please contact an
authorized service agent to request replacement of the indoor
light. Non-professional service personnel must not replace the
indoor light.
Vacation and Moving Care
Vacations
If You Choose to Leave Refrigerator On While You Are Away:
1.
Use up any perishables and freeze other items.
2.
If your refrigerator has an automatic ice maker and is
connected to the household water supply, turn off the water
supply to the refrigerator. Property damage can occur if the
water supply is not turned off.
3.
If you have an automatic ice maker, turn off the ice maker.
NOTE:
Depending on your model, raise the wire shutoff arm
to OFF (up) position or press the switch to OFF (right).
4.
Empty the ice bin.
If You Choose to Turn Refrigerator Off Before You Leave:
1.
Remove all food from the refrigerator.
2.
If your refrigerator has an automatic ice maker:
■
Turn off the water supply to the ice maker at least one day
ahead of time.
■
When the last load of ice drops, raise the wire shutoff arm
to the OFF (up) position or move the switch to the OFF
(right) setting.
3.
Unplug refrigerator.
4.
Clean, wipe, and dry thoroughly.
5.
Tape rubber or wood blocks to the tops of both doors to prop
them open far enough for air to get in. This stops odor and
mold from building up.
Moving
When you are moving your refrigerator to a new home, follow
these steps to prepare it for the move.
1.
If your refrigerator has an automatic ice maker:
■
Turn off the water supply to the ice maker at least one day
ahead of time.
■
Disconnect the water line from the back of the refrigerator.
■
When the last load of ice drops, raise the wire shutoff arm
to the OFF (up) position or move the switch to the OFF
(right) setting.
2.
Remove all food from the refrigerator and pack all frozen food
in dry ice.
3.
Empty the ice bin.
4.
Unplug refrigerator.
5.
Clean, wipe, and dry thoroughly.
6.
Take out all removable parts, wrap them well, and tape them
together so they don’t shift and rattle during the move.
7.
Depending on the model, raise the front of the refrigerator so
it rolls more easily OR screw in the leveling legs so they don't
scrape the floor. See “Adjust the Doors” or “Door Removal,
Leveling and Alignment.”
8.
Tape the doors closed and tape the power cord to the back of
the refrigerator.
When you get to your new home, put everything back and refer
to the Installation Instructions for preparation instructions. Also,
if your refrigerator has an automatic ice maker, remember to
reconnect the water supply to the refrigerator.
Freezer Shelf
(number of shelves varies by model)
To Remove and Replace the Bottom Shelf:
1.
Lift up the front and back of the shelf, and remove from the
cabinet. Be sure not to remove the retaining rods.
2.
Replace the shelf aligning the rods with the cabinet ribs.
Apply a little pressure on the shelf to attach the rods to the
ribs of the cabinet.
To Remove and Replace the Mid and Top Shelf:
1.
With your hand, push the shelf from bottom to top until it is
released from the holding rod. Pull the shelf until it is released
from the rear rod. Remove from the cabinet.
2.
To replace the shelf:
■
Replace rods into the support holes. Push the rods down
so it clicks into the hole.
■
Identify the front and rear trim of the shelf.
■
Place the rear trim on the rear rod and push the shelf so
it clicks the rod into the trim rear. (Keep the front raised
while pushing).
■
Lower the front of the shelf until the front trim is on the rod
and push the shelf down so it clicks the rod into the trim
rear.
NOTE:
Be sure that both sides of the shelf are positioned evenly
in the shelf support holes and the shelf is secure.
