![background image](http://html.mh-extra.com/html/whirlpool/8lch-kkscsss5hw/8lch-kkscsss5hw_user-manual_19140013.webp)
13
DISPENSING COFFEE
START
INFU-
SION
READY
PRE-
HEAT/
INFU-
SION
START
READY
PRE-
HEAT/
Do not open the lid when the red “do
not open” symbol button is on.
a. When the “ ” symbol
button is flashing, open the lid
and place a coffee capsule in
the appropriate location inside
the unit
b. Press the capsule down
with your hand to pierce the
bottom.
INFU-
SION
START
READY
PRE-
HEAT/
INFU-
SION
START
READY
PRE-
HEAT/
Operating Instructions:
1. Make sure the RED hot water switch at the back of the unit is on (See #15 on page
11).
Touch the PRE-HEAT/READY
button if the LED light is not on.
The PRE-HEAT/READY symbol button will
go on only when the hot water temperature is
201°F. The water temperature goes down to
172°F if the brewer is not used for 2 hours. The
ready light might keep on flashing if the water
level is low. Please check the bottle.
c. If the brewer was switched off, wait up to 10 minutes for the “READY” light to
turn ON. If the “READY” light is flashing, this indicates that there is not enough wa-
ter in the cooler. Wait until water is pumped up. Check if the bottle has water.
2.
3.
4.
INFU-
SION
START
READY
PRE-
HEAT/
By default, the 8 oz, middle cup
is selected. If you wish a differ-
ent cup size, touch the 4, 6, 8,
10 or 12 oz cup sizes symbol-
ized by the progressively larger
cup images.
Place a coffee cup on top of
the brewer’s drip tray.
5.
6.