GB10
Selecting the hob surface
This operation optimises automatic operation of the hood.
Switch the hood OFF.
Press keys "
2
" and "
3
" at the same time for 5 seconds until the hob being used is displayed, according to the following legend:
LD1
LEDs on = gas hob
LEDs
LD1
+
LD2
on = Induction hob
LEDs
LD1
+
LD2
+
LD3
on = Electric hob
The type of hob can be selected pressing keys "
2
" and "
3
".
Ten seconds after the type of hob has been selected, this will be automatically saved by the system.
Saving of the selection will be confirmed by the selection itself flashing 3 times. Once the selection has been saved the hood will go off.
Note:
The type of hob set by default is the Gas hob.
-
Disconnect the appliance from the power supply.
Cleaning the perimeter suction panel
Dismantling:
Pull the panel (FRONT SIDE) downwards
Cleaning:
The suction panel must be cleaned with the same frequency as the grease filter. Use a damp
cloth and a soft liquid detergent.
Do not use products containing abrasives. DO NOT USE ALCOHOL!
Assembly:
The panel must be fixed from the front, hinged to the appropriate pins on the surface of the
hood.
WARNING: Always check that the panel is fitted properly.
WARNING:
MAINTENANCE
Содержание 891
Страница 7: ...GB7 ...
