
GB67
AUTOMATIC OVEN CLEANING
For the description of this function, see the chapter CLEANING and the functions table at page 68.
To activate the oven’s automatic cleaning cycle (pyro-cleaning), proceed as follows:
1.
Select “Cleaning” from the main menu using buttons
and
.
2.
Press button
: “Pyro Express Cleaning” and “Pyro Cleaning” appear on the display.
3.
Select one of the two cycles using buttons
and
confirm with
: the display shows the
duration and end time of the selected cycle (end time can be delayed by following the same procedure
indicated in paragraph “SETTING COOKING TIME/DELAYED START”).
4.
Press button
: the display shows the instructions to be followed in order to start the cycle. After
following each instruction, confirm with button
.
5.
Upon the final confirmation, the oven starts the cleaning cycle and the door is automatically locked: a
warning appears on the display for around three seconds. Immediately afterwards, the display shows a
progress bar indicating the cleaning cycle progress.
N.B.: If the oven door is opened before it is unlocked automatically, a warning message appears on
the display. When the door is reclosed, the cycle must be started again by pressing button
.
6.
At the end of the cycle, the relative message flashes on the display, after which the cooling bar indicates
cooling in progress. The residual temperature is indicated on the display. The door remains locked until
the temperature inside the oven has returned to an acceptably safe level: the display shows the time of
day.
Specials
Cleaning
Settings
Step-by-step
guidance
Pyro Express
Pyro
3 hour high
temperature cleaning
Cleaning
-03:00
TIME
17:02
END TIME
1/3
Please switch off cooktop
above oven and press
✓
2/3
Please remove all accessories
from the oven and press
✓
1/3
Remove stains from glass
with moist sponge, press
✓
Cleaning
in progress
-02:59
TIME
17:33
END TIME
Door will be locked
during cleaning
Please close the door
Cleaning
Finished
-00:00
TIME
17:33
END TIME
102°C
RESIDUAL HEAT
18:37
Содержание 693
Страница 25: ...GB76 ...