Whirlpool 6528 Скачать руководство пользователя страница 13

GB 13

AFTER-SALES SERVICE

Before contacting After-Sales Service:

1. Try to remedy the problem yourself (see 

“Troubleshooting Guide”).

2. Restart the programme to check whether the 

problem has solved itself.

3. If the washing machine continues to function 

incorrectly, call our After-Sales Service.

Specify:
• 
The nature of the problem.
• The washing machine model.
• The service code (number after the word 

SERVICE).

The After-Sales Service sticker can be found 
inside the door.
• 
Your full address.
• Your telephone number and area code.

After-Sales Service phone numbers and 
addresses are given on the guarantee card. 
Alternatively, consult the dealer where you 
purchased the appliance.

ACCESSORIES

For some models, you can obtain via our After-
Sales Service or your specialist dealer:
• Pedestal Drawer which can be installed 

beneath your washing machine. It raises your 
machine to allow for more comfortable loading 
and unloading, as you now no longer need to 
bend as far to access the unit. Furthermore, it 
offers a great space-management tool and 
storage solution.

• Stacking Kit by means of which you can fix 

your dryer on top of your washing machine and 
thus effectively save space.

Certain models are able to be installed under your 
kitchen worktop; in that case, please contact our 
After-Sales Service (see above). Be aware that:
• the appliance MUST be installed under a 

continuous worktop.

• according to the legal safety regulations, the 

installation of the appliance MUST be carried out 
by an authorized technician or by our After-Sales 
Service.

• the appliance MUST be installed using the Cover 

Panel Kit which can be obtained from specialist 
dealers or our After-Sales Service.

TRANSPORT/HANDLING

Never lift the appliance by the worktop when transporting.

1. Pull out the mains plug.
2. Turn off the tap.
3. Check that machine door and detergent dispenser are properly closed.
4. Disconnect the inlet and drain hoses.
5. Eliminate all water from the hoses and from the appliance (see “Removing The Filter/Draining 

Residual Water”).

6. Fit the transport bolts (obligatory).

Содержание 6528















Отзывы: