23
PROBLEM
Washer fills and
drains without
running
Washer drains
during wash and
rinse cycles, or
water siphons out
POSSIBLE CAUSE
Cycle control knob is not pointing
to a number in the cycle.
Drain hose is lower than the
water level in the washer.
SOLUTION
Set cycle control knob on correct
number in the cycle.
Adjust drain hose so that it is higher
than the water level in the washer.
2. If your problem is not due
to one of the items listed in
Step 1 …
Contact the dealer from whom you purchased
the unit or an authorized Whirlpool service
company.
3. If you need FSP
*
replace-
ment parts …
FSP is a protected trademark of Whirlpool
Corporation for quality parts. Look for this
symbol of quality whenever you need a
replacement part for your Whirlpool appliance.
FSP replacement parts will fit right and work
right, because they are made to the same
exacting specifications used to build every new
Whirlpool appliance. To locate FSP replace-
ment parts in your area, contact the dealer
from whom you purchased the unit or an
authorized Whirlpool service company.
Gearcase
assembly covered
by your warranty
I F Y O U N E E D A S S I S T A N C E O R S E R V I C E
