Bottom Mount Refrigerator
PRODUCT MODEL NUMBERS
OVERALL DIMENSIONS
LOCATION REQUIREMENTS
GB2SHKXM
GB9SHKXM
Electrical:
A 115 Volt, 60 Hz., AC only 15 or 20
ampere fused, grounded electrical supply is
required. It is recommended that a separate
circuit serving only your refrigerator be provided.
Use an outlet that cannot be turned off by a
switch. Do not use an extension cord.
Water:
A cold water line with water pressure
between 30 and 120 psi is required for the water
dispenser and ice maker.
If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the system needs to be a minimum of
40 to 60 psi (276 - 414 kPa).
IMPORTANT:
The pressure of the water coming
out of a reverse osmosis system going to the
water inlet valve of the refrigerator needs to be
between 30 and 120 psi (207 - 827 kPa).
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. 2300234
07-13-04
2
¹⁄₈
" (5.4 cm)
¹⁄₂
" (1.25 cm)
To ensure proper ventilation for your refrigerator, allow 1/2 in. (1.25 cm) space at the top
and behind the refrigerator for ease of installation.
When installing your refrigerator next to a fixed wall, leave 2-1/8 in. (5.4 cm) minimum
on each side (depending on your model) to allow for the door to swing open.
If your refrigerator has an ice maker, allow extra space at the back for the water line
connections.
NOTE:
Do not install the refrigerator near an oven, radiator, or other heat source, nor in a
location where the temperature will fall below 55°F (13°C).
including
handle
®
Depth
Width
Height
Cabinet
Model size
“A”
“B”
“C”
Height “D”
19 cu.ft.
32 1/2"
29 5/8"
65 5/8"
66 7/8"
22 cu.ft.
32 1/2"
32 5/8"
68 5/8"
69 7/8"
B
C
D
A
