background image

12

Crispers and Meat Drawers

(on some models)

Drawers

To remove and replace a drawer:

1.

Slide drawer straight out to the stop. Lift the front of the 
drawer and slide it out the rest of the way.

2.

Replace a drawer by sliding it back in fully past the stop.

Crisper Cover

To remove the crisper(s) cover:

1.

Remove crisper(s). Hold the glass insert firmly with one hand 
and press up in the center of the glass insert until it rises 
above the plastic frame. Carefully slide the glass insert 
forward to remove.

2.

Lift the cover frame and remove it. 

To replace the crisper cover:

NOTE:

 Before reinstalling the cover, make sure the U-shaped 

reinforcement bar is reinstalled in the front edge of the crisper 
cover.

1.

Fit back of cover frame into supports on side walls of the 
refrigerator and lower the front of the cover frame into place.

2.

Slide rear of glass insert into cover frame and lower front into 
place.

Meat Drawer Cover

To remove and replace the meat drawer cover (Style 1 
glass):

1.

Remove the meat drawer. Tilt up the front of the cover and lift 
at the back. Pull the cover straight out.

2.

Replace the cover by guiding the rear hooks into the shelf 
supports. Tilt the cover up at the front until the rear hooks 
drop into the slots. Lower the front of the cover to a level 
position and replace the meat drawer.

To remove and replace the meat drawer cover (Style 2 
plastic):

1.

Remove the meat drawer. Tilt the cover up at the front and 
pull it forward and out.

2.

Replace the meat drawer cover by fitting the notches and rear 
edge of the cover over rear and center crossbars on the shelf. 
Lower cover into place and replace the meat drawer.

Crisper Humidity Control

(on some models)

You can adjust the amount of humidity in the moisture-sealed 
crisper using the settings between HIGH and LOW.

LOW (open) lets moist air out of the crisper for best storage of 
fruits and vegetables with skins.

Fruit: Wash, let dry and store in refrigerator in plastic bag in 
crisper. Do not wash or hull berries until they are ready to use. 
Sort and keep berries in original container in crisper.

Vegetables with skins: Place in plastic bag or plastic 
container and store in crisper. 

HIGH (closed) keeps moist air in the crisper for best storage of 
fresh, leafy vegetables.

Leafy vegetables: Wash in cold water, drain and trim or tear 
off bruised and discolored areas. Place in plastic bag or 
plastic container and store in crisper.

Humidity Control Location

Humidity Control on crisper drawer (Style 1 - on left/Style 2 - 
on right)

Chilled Meat Drawer

(on some models)

Slide the meat drawer temperature control forward to make the 
meat drawer less cold or backward to make the drawer more 
cold.

COLDER

COLD

Содержание 2225405





















Отзывы: