Whirlpool 2225405 Скачать руководство пользователя страница 10

Страница: 10 / 20

Using the Control(s)

For your convenience, your refrigerator control(s) are preset at the
factory. When you first install your refrigerator, make sure that the
control(s) are still preset to the mid-settings as shown.

NOTE:

To turn your refrigerator off, turn the refrigerator control to

the word OFF or until the word OFF appears. Your product will
not cool when the refrigerator control is set to OFF.

Mid-setting “3”

Mid-setting “4”

IMPORTANT:

■

Give your refrigerator time to cool down completely before
adding food. It is best to wait 24 hours before you put food
into the refrigerator.

■

If you add food before the refrigerator has cooled completely,
your food may spoil. Adjusting the Refrigerator and Freezer
Controls to a higher (colder) than recommended setting will
not cool the compartments any faster.

Adjusting Controls

The mid-setting(s) indicated in the previous section should be
correct for normal household usage. The controls are set
correctly when milk or juice is as cold as you like and when ice
cream is firm.

If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not blocked.

If you need to adjust temperatures, use the settings listed in the
chart below as a guide. On models with two controls, adjust the
refrigerator temperature first. Wait at least 24 hours between
adjustments and then recheck the temperatures

Ice Maker

(on some models - Accessory)

Turning the ice maker on/off

NOTE:

Do not force the wire shutoff arm up or down.

■

To turn the ice maker on, simply lower the wire shutoff arm.

NOTE:

Your ice maker has an automatic shutoff. As ice is

made, the ice cubes will fill the ice storage bin and the ice
cubes will raise the wire shutoff arm to the OFF (arm up)
position.

■

To manually turn the ice maker off, lift the wire shutoff arm to
the OFF (arm up) position and listen for the click to make sure
the ice maker will not continue to operate.

Increasing ice production rate

■

NORMAL Ice Production: In Normal ice production mode, the
ice maker should produce approximately 8 to 12 batches of
ice in a 24-hour period. If ice is not being made fast enough,
turn the Freezer Control toward a higher (colder) number in
half number steps. (For example, if the control is at 3, move it
to between 3 and 4.) Wait 24 hours and, if necessary,
gradually turn the Freezer Control to the highest setting,
waiting 24 hours between each increase.

■

MAXIMUM Ice Production (on some models): In Maximum ice
production, the ice maker should produce approximately 16
to 20 batches of ice in a 24-hour period. If your refrigerator
has the maximum ice production feature, push the switch to
MAX.

CONDITION/REASON:

ADJUSTMENT:

REFRIGERATOR section too
warm

■

Door opened often, large
amount of food added or room
temperature very warm

Adjust REFRIGERATOR

or TEMPERATURE
Control one setting
higher

REFRIGERATOR

FREEZER

FREEZER section too warm/ice
not made fast enough

■

Door opened often, or large
amount of food added or very
cold room temperature (can’t
cycle often enough)