Whirlpool 1997 F, Руководство по обслуживанию

Страница: 16 / 32

11
Removing the Evaporator Fan Motor
The evaporator fan motor is mounted on a bracket that is attached to a shroud mounted to the back
wall of the freezer section.
(Fig. 13)
1. Removing the two (2) hex-head screws that secure the fan motor bracket to the shroud.
2. Disconnect the wiring harness connectors from the evaporator fan motor terminals.
Fig. 13
3. Pull the evaporator cover up and out of the unit.
Screws (4)
Screws (3)
Screw (1)
Screw Screw
Fig. 12
Bi-Metal
Thermostat
Servicing the Evaporator, Defrost Bi-metal and Defrost Heater
The evaporator, defrost bi-metal (Fig. 14) and defrost heater
(Fig. 15) are serviceable parts on these units.
Removing the Defrost Bimetal
1. Disconnect the wiring harness connectors
from the defrost bi-metal leads.
2. Slide the bi-metal mounting clip from the outlet
tubing of the evaporator.
Fig. 14
Fan
Shroud