Instruction Manual: Bronco_Megacooler_8185_R1
Last Updated: April 28
th
, 2022
Page 2 of 16
www.whipplesuperchargers.com
INTRODUCTION
Before beginning installation, please
read this manual and important notes:
•
Please read the installation manual and verify that all items are present. If you are missing hardware or have any
questions, please contact your dealer or Whipple.
COMPETITION BASED PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION
WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC
REGULATORY EXEMPTION (VISIT THE “EMISSIONS” PAGE AT
HTTP://WWW.SEMASAN.COM/EMISSIONS
FOR STATE BY STATE DETAILS.
COMPETITION BASED PRODUCT IS LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY
NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY.
IT IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO ENSURE THAT IT IS
USED IN COMPLIANCE WITH ALL APPLICABLE LAWS AND REGULATIONS.
RECOMMENDED TOOLS AND SUPPLIES
The following items are not included in this supercharger kit and it is strongly recommended that they're used for ease of
installation or maximum performance.
Safety glasses, 3/8” torque wrench, 3/8” assorted metric socket set, T40 Torx, trim pad tool (for pushpin removal), floor
jack.
PRE-INSTALLATION CHECKLIST
Before installing your Whipple Kit, complete the following checklist.
1.
Verify Condition of Vehicle: Before the upgrade kit is installed, ensure the engine runs smoothly and that the
factory malfunction indicator light (MIL) is off. Only install the supercharger kit if the engine runs smoothly
and
the MIL is off.
2.
!!
CAUTION
!!
This product is intended for use only on STOCK, UNMODIFIED, WELL-MAINTAINED
engines. Installation on a worn-out or modified engine is not recommended without factory
computer and fuel system modifications.
3.
Assess Cleanliness of Installation Area: Make sure your work area and the under-hood area are free from debris.
This supercharger is a high-quality, close-tolerance compressor and must not be subjected to contamination by
dirt or any type of foreign material. If necessary, vacuum around engine to remove any foreign material.
4.
!!
CAUTION
!!
Identify Kit Components: Before beginning installation, identify all the components of your
Whipple Kit and ensure all items are present and undamaged.
