Wherify Wherifone G500 Series, Руководство пользователя

Страница: 37 / 148

31
Volume Control:
Pre ss either of the s e
bu tton s to control
vol u me. Pre ss (+) to
incre as e vol u me or (-)
to decre as e vol u me.
Programmable Buttons:
Pre ss a ny of the n u m b ered
bu tton s to di a l a pre-
progr a mmed phone
n u m b er.
Menu/OK Button:
Pre ss thi s bu tton to
a n s wer a n incoming c a ll.
Adapter Port:
Pl u g yo u r ch a rger or
h a nd s - free he a d s et
in here.
Figure 1.7
Book . For the speed dial buttons, press the button once to display
a pre-programmed phone number, then press the menu/OK button to
dial that number. Or you can press and hold a numbered button for
four (4) seconds to dial the selected number. To make a phone call
using a number in the
Phone Book , press the Phone Book button,
and scroll left or right using the keypad to find the desired number.
Then press the
Menu/OK button to dial that number.
To end a phone call, press the Power Off/End button in the middle of
the dial pad. Please note that if you press and hold the
Power Off/End
button down for more than five seconds the phone will turn off.
To use a headset with your Wherifone, simply plug the headset
connector into the Charger/Headset port located on the bottom of the
Wherifone. Then insert the headset bud into your ear.
Please note
that you should only use a headset intended for use with the
Wherifone as you may damage your Wherifone if you try to use
a non-Wherifone headset.
G500Series UG_R5.qxd 7/18/06 1:54 PM Page 31