___________________________________________________________________________
Infrastructure Installation Guide
___________________________________________________________________________ 22
Location Sensor Installation Guide
D0405 rev PA6
Copyright WhereNet, Corp. 2001
WhereNet Confidential
8.2
3/8ths Threaded Rod
The Location Sensor can be hung via a 3/8 inch (10 mm) threaded rod per the
following instructions. The required supports, threaded rod, nuts, etc., are not
included.
•
Cut the threaded rod to the desired length and install it directly above the
desired Location Sensor position.
•
Thread one nut up 2 inches (50 mm) from the bottom of the threaded rod.
•
Place the Location Sensor onto the threaded rod and install the second nut.
•
Tighten the upper nut down on top of the Location Sensor housing.
8.3
Pole Mount
The required pole mount kit, catalog number RM-410-00, must be ordered
separately. The Location Sensor can be mounted to a pole per the following
instructions:
TBD
