Page 3
LED’S For
Slide Switch
Groove on side of Aluminum
Cover used to slide in the 2
carriage bolts (Item 12) of
the mounting bracket
4 Position
Slide Switch
Push Button
Switches
Aluminum
Extruded
Cover
Backlighted
Function
Windows
The Model PCC-S9N Power Control Center is designed exclusively
to control Whelen Models 9000 and ADVANTAGE Series Lightbars
equipped with a Relay Matrix Board.
INSTALLATION
RECOMMENDATIONS
1.
Remove Mounting Bracket
(Item 5) from relay/switch
box assembly (Item 1)
by loosening the two
acorn nuts (Item 12) and
sliding the mounting bracket
off the aluminum cover's
side grooves.
Choose a location for the
2.
PCC-S9N and secure the
mounting bracket firmly
to the mounting surface
with customer supplied
hardware.
NOTE:
The Mounting Bracket
may be installed in any position,
as long as the relay/switch box
assembly can slide in and out from
the mounting bracket, and all switches
are easily accessible.
Wire the unit (See Pg. 2) and slide
3.
the unit into position inside the mounting
bracket. Finally, tighten the two acorn nuts
(Item 12) located on each side of the PCC-S9N
PART OF
ITEM 4
DESCRIPTION
QTY.
1
REF
REF
1
1
REF
REF
REF
REF
REF
REF
REF
1
PART NUMBER
01-0285547-00
10-0340731-01
10-0340730-01
10-0121114-01
10-0320776-00
13-104320-120
07-241559-000
14-104069-080
16-1031060-04
16-1011320-20
46-0725500-00
46-0725628-00
01-0481326-00
ITEM
1
-
-
4
5
6
7
8
9
11
12
13
14
-
01-0881326-00
-
FINAL ASSEMBLY
RELAY/SWITCH BOX ASSEMBLY
LABEL, FUNCTION (W/ WHITE LETTERS)
LABEL, FUNCTION (W/ WHITE LETTERS)
LABEL, MADE IN THE U.S.A., FLAG
LABEL, SERIAL NUMBER
#10-24 ACORN NUT S/S
MOUNTING BRACKET, S9N
#10-24 X 1/2" CARRIAGE BOLT
#10 SPLIT LOCKWASHER
POWER INPUT PIGTAIL KIT
CONN. ASSY. MODEL PCDS9N
INSTALLATION KIT PCC-S9N
WASHER, #10 EXTERNAL TOOTH SS
PART OF
ITEM 4
1
6 7
12
11
13
14
5