Woodway Engineering Ltd
Lower Road, Barnacle
Coventry, CV7 9LD
United Kingdom
Tel: +44 (0) 24 76 841750
Fax: +44 (0) 24 76 621796
www.woodwayengineering.com
P R O G R A M M I N G G U I D E
6
Transferring Program to CenCom Sapphire™ Unit
Before transferring to the CenCom Sapphire™ UK unit, it’s
recommended you save your completed program.
To transfer your completed program to your CenCom Sapphire™
UK unit, it must be disconnected from any power source and
connected to your computer using a USB type A- USB type B
programming lead.
Once the CenCom Sapphire™ UK is connected, simply press the
green transfer icon in the top left corner of the screen.
A green status bar will then appear in the bottom right of the
screen showing the transfer to the CenCom Sapphire™ UK.
Once this has finished, a window will appear, prompting you to
disconnect the CenCom Sapphire™ UK from the computer.
Default Settings
The CenCom Sapphire™ UK programming software has default settings applied when it is first opened. These include:
• The default setting for hands free is piercer
• When siren is sounding, output 9 is automatically activated for use as siren in use.
• The run lock is set for a default run time of 4 hours.
• When run lock is activated, outputs 6 &7 are automatically activated remote input 10 (R10) is default set as airhorn.
• Remote input 7 (R7) is default set for remote 999 activation.
• Shut down delay is default set at 30 minutes.
Certain outputs are also already set to activate or deactivate to certain control head switches and remote inputs.
For information on how to alter or remove these defaults as well as further expanded details on all sections covered within this guide,
please refer to the full Programming Manual, available from the product page on our website- www.woodwayengineering.com
Your CenCom Sapphire
™
UK is programmed and ready to use.