Wheeltech Monte Carlo Electric Scooter
Page 19 of 19
Owner’s Handbook (Part Code: Z40969)
7.6 MOVING ABOUT
♦
Switch off the power with the ignition key before moving. Always dismount from the scooter before
moving.
♦
Lift the scooter by the chassis, and not by the bumpers. Lifting the scooters by the bumper could cause
damage or injury.
♦
For your safety, always ask for help if required. You will need two people when moving or lifting the
scooter whole.
7.7 DISASSEMBLING THE SCOOTER
The Monte Carlo 4 can be disassembled into five pieces, the seat (weight 11.8kg), the front section (weight
22kg), the rear section (weight 18kg), and two batteries (weight 11.2kg each) without any tools. Please
follow the steps and photographs below:
1. Switch off the scooter, unscrew
the seat hand wheel and remove
seat. Be careful not let the seat
post drop when removing.
2. Lift up the rear shroud to
remove.
3. Disconnect the batteries by
disconnecting the two red
connectors and two black
connectors.
4. Undo the Velcro straps and
remove batteries.
5. Loosen the tiller adjustment
knob and fold down the tiller
and retighten knob.
6. Remove the lock pin.
