Wheeltech Monte Carlo Electric Scooter
Page 11 of 11
Owner’s Handbook (Part Code: Z40969)
§
Tiller Adjustment
§
The tiller can be adjusted in to many different positions to suit each driver.
§
The tiller can be adjusted by following the steps below.
Step 1:
Loosen the
knob
(shown by
arrow) so
the tiller can
move.
Step 2:
Move the
tiller into the
required
position then
retighten the
knob to
secure the
tiller.
5. DRIVING ON THE ROAD
§
Starting and Driving
1. Make sure the seat is installed properly.
2. Make sure the tiller has been secured properly.
3. Fold down the armrests so you can rest your arms on them.
4. Turn the power switch to “ON”.
5. Check battery indicator to see whether there is enough power for your journey. If you have any doubt
about the remaining power, please recharge the batteries before departure.
6. Set the speed dial to a position you feel safe and comfortable with.
7. Check that the wigwag paddle works correctly.
8. Make sure the electromagnetic brake works correctly.
9. Before driving, ensure it is safe to do so in the environment around you.
F
Attention
1. Do not push both RH & LH sides of the wigwag paddle simultaneously. This might leave you unable to
control your scooter.
2. Do not turn the power switch to OFF whilst driving as this will lead to an emergency stop and possible
risk of accident and injury.
3. Do not set to the highest speeds whilst driving indoors.
4. Do not adjust the speed dial whilst driving, a sudden change in speed may cause danger to you and
others, and may cause damage to your scooter.
5. Do not place magnetic devices near the area of the operation handle as this could affect the safe
operation of your scooter.
6. Do be careful whilst driving in heavy traffic or crowded areas.
7. Whilst reversing the vehicle, beware of people or objects behind you.
