Wheatstone Corporation D-7, Техническое руководство, Страница: 28 / 92

C O N T R O L P A N E L
page 3 – 8
D-7 / June 2006
Event Default Button
This control allows rapid access to
a default or home control surface set-
ting. Push it, and the TAKE button in
the Preview section will flash. Hit the
TAKE button and the default setting
will be executed.
Establishing the Default Setting
This setting would normally be set only once. For example, it may be
desirable to have all controls set to zero, or everything programmed to
typical nominal settings. To establish the default setting, adjust all the
control surface controls to their desired settings, press the MODIFY button
and then the DEFAULT button. The default setting is stored.
Naming an Event
When events are saved, they receive a default event designation
number. This way events can be saved quickly without having to name
them. However, an event may be custom named when saved, or at a later
time. To rename the displayed event, press the ALPHA SCROLL knob.
The CURSOR LT and CURSOR RT buttons will light and the cursor,
indicated by a flashing character, will be at the beginning of the name.
Also, the SAVE button will begin to flash. At any time you can use
CURSOR LT and CURSOR RT to move to a character you want to change.
Once the cursor is at the desired character, rotate the ALPHA SCROLL
encoder until the desired new character is displayed. Once all desired
characters have been changed, simply press SAVE to save your changes.
The event is stored with the desired name. At any time you can cancel the
name edit by pressing the ALPHA SCROLL knob. Also, if you stop
making name changes but fail to press the SAVE button, the name edit
process will automatically cancel after a delay of about 10 seconds.