WHD - Wilhelm Huber+Söhne GmbH+Co.KG
Bismarckstr. 19
D-78652 Deißlingen
Tel. Ze49 74 20 / 8 89-0
Fax Ze49 74 20 / 8 89-51
E-Mail:
Web:
www.whd.de
This product supports all CE-
marking criteria. The declaration of
conformity certificate can be ob-
tained from WHD
.
WHD are members of the INTERSEROH association.
We participate in the dual system as well as other
industry-specific solutions. Therefore, plastic, metal
and electronic parts can all be recycled.
Proceed with PAIRING according to your Bluetooth enabled device.
Making sure that your device meets the required Bluetooth specification.
The pairing process is very different from device to device.
!
Please, read the manual of your Bluetooth-enabled device carefully.
Pairing in general:
Pairing needs
a distance 1 … 5 m
between the BTR 203 and your Bluetooth
-enabled device
.
!
Activate the Bluetooth Mode of your mobile device and start the SEARCH
function for other Bluetooth equipment.
The device will show as „
WHD
“. Select and continue.
Configuration of the BTR 203 with the WHD BTR configuration app:
You can configure the BTR 203 via this APP.
The password for the APP is
1 9 3 0 4 5
.
Further information can be found in the technical information for this APP.
Disconnecting BT enabled device:
Proceed with DISCONNECTING according to your Bluetooth enabled de-
vice.
FAQs
Why does my mobile phone loose its connection to the BTR 203 when I
was out of the room?
- You were possibly more than 5 minutes out of the Bluetooth transmission
range. Your mobile phone needs to be connected again manually.
- Maybe another Bluetooth-enabled device is still connected with the BTR
203. Disconnect it and connect to your device again.
How much mobile devices can be handled by the BTR 203?
Up to 8 different pairings with different devices (9th IN/ 1st OUT).
Bluetooth Operation
When power is connected the BTR 203 is automatically
in Pairing Mode.
Operation
Thank you for buying our Bluetooth receiver for hidden mounting, also available as a set with Exciters.
Please read this manual carefully, especially the safety and security information.
Safety & Security Informations
Improper handling may void warranty!
In addition to this guidance please comply with your own
country-specific safety & security regulations.
The BTR 203 and the speakers are not suitable for outdoor
operation.
Intended use:
Indoor, hidden installation
Operating Temperature:-20 ... + 60° C.
The sound of the exciter depends on the material used and
the installation location.
Note:
- Make sure that the resulting impedance of the connected
speakers are properly sized to the output of the amplifier safe.
- Ensure correct polarity.
- The electrical supply must be disconnected before working on
the device.
- Keep the original packaging (for return in case of warranty).
- Protect the product and the components supplied against
dripping or splashing. Make sure, as with all electronic prod-
ucts that no liquids can access any part of the system. This may
cause a malfunction or fire.
- Do not expose the product to temperatures above 30° C. If
the product is exposed to extreme heat, it can ignite and ex-
plode.
- Do not expose the product to electrostatic discharges.
- Never put the product near heat sources such as radiators,
heat registers, stoves or other types of devices that produce
heat.
! To avoid battery drain of your Bluetooth devices, please at
all times disconnect the devices when they are not needed.
Version
(Technical and optical
modifications reserved)
09.03.2021
- Page 2 -
Mounting Exciter X 32-8
Positioning
- Preferably to materials, which are mounted oscillating, not as on
the entire surface bonded surfaces.
- Centrally as possible on the surfaces, max. away from edges or any
restraints so that the exciter, the material max. may well excite oscil-
lations.
- Do not operate the Exciter on magnetizable surfaces.
This affects the function.
- Do not place the Exciter in the vicinity of CRT monitors,
floppy disks, hard disks, credit cards, and video and au-
dio cassettes.
Pasting the Exciter
On smooth surfaces, it can not be screwed:
- Remove the foil of double-sided tape on the front part (1) and
press Exciter to cleansed face.
Screwing the Exciter
- Mount the Exciter on the surface with the screws (4).
(
1
) … front part
(
2
) … terminal
(4 Ohm)
(
3
) … metal part
(4) … holes for screws
Manual BTR 203 and Sets
Applicable for
124-025-04-203-10 (NT)
124-025-04-203-50 (2x X.32-8, 2x cable 2m, NT)
124-025-04-203-00 (2x X.32-8, 2x cable 2m, IND)
