WHD - Wilhelm Huber+Söhne GmbH+Co.KG
Bismarckstr. 19
D-78652 Deißlingen
Tel. Ze49 74 20 / 8 89-0
Fax Ze49 74 20 / 8 89-51
E-Mail:
Web:
www.whd.de
This product supports all CE-
marking criteria. The declaration of
conformity certificate can be ob-
tained from WHD
.
WHD are members of the INTERSEROH association.
We participate in the dual system as well as other
industry-specific solutions. Therefore, plastic, metal
and electronic parts can all be recycled.
Operation
Thank you for buying our Bluetooth receiver for hidden mounting, also available as a set with Exciters.
Please read this manual carefully, especially the safety and security information.
Specifications
Exciter X.32-8
Load Rating / Music Power
6 /15 W
Impedance
8 ohms
SPL (1W/1m)
depending on material
Frequency Range
depending on material
Transm. Angle 1/2/4/8 kHz
(-6 dB)
depending on material
Dimensions
Ø70x26 mm
Mounting Depth
26 mm
Weight
0.126 kg
Operating Temperature
0°C bis + 60 °C
Terminal Connection
Color (cable)
Exciter X 32-4/8
Black
(-)
Red
(+)
Connecting power supply:
!
When power is connected the BTR 203 is automatically in Pairing Mode.
With the use of electronic transformers (lighting) and BTR 203, the following points have be observed to avoid potential prob-
lems:
- Cables between transformer and lamp < 2m.
- Power line cables to be kept at a distance of 5-10 cm from speaker cables (AC coupling).
- RF cables to be kept at a great distance from any metal surfaces (reduction of capacitive coupling).
- When the RF cable to the transformer is > 2m twist the single wires.
- Power line cable and RF cable not too close to the BTR 203.
- Power line cables are not to be crossed or to run at right angles.
Mounting and connections
!
For installation with other ceiling /wall speakers, cut the enclosed connection cables and extend the cable to your loudspeaker with speaker
cables (2x1,5 mm²).
Version
(Technical and optical
modifications reserved)
09.03.2021
- Page 1 -
Manual BTR 203 and Sets
Applicable for
124-025-04-203-10 (NT)
124-025-04-203-50 (2x X.32-8, 2x cable 2m, NT)
124-025-04-203-00 (2x X.32-8, 2x cable 2m, IND)
NT … Power Supply incl.
IND … Industrial Version
Specifications
BTR 203
Power Supply
12...24 V DC
Music Power
2x3,5W@8 ohms / 1x6W@4 ohms
Speaker Impedance
1x4 ohms or 2x8 ohms
Bluetooth Standards
Bluetooth 3.0 EDR
Bluetooth Profile
A2DP
Dimensions (H/W/D)
45 x 15 x 140 mm
Weight
0.055 kg
Operating Temperature
0 °C … +45 °C
Maximum distance between
tansmitter an receiver
10 m
Power Consumption
2 W
Connect speaker cable according to
imprint.
- Install the cables (12...24 Vpower supply, speaker cable, cinch cable or antenna cable) for the BTR 203 in accordance with installation guide-
lines and your desired port scenario
- If the device should be inserted through a cut out, make sure that it fits in.
!
Install the device only in locations that ensure sufficient temperature dissipation. Not e.g. in wool, because the device can drop out at high
temperature.
Connecting speakers: Set 2x X.32-8 / speakers (8 ohms) Speakers (4 ohms)
+ - + -
+ - + -
12...24 VDC
12...24 VDC
