- 5 -
3. Features
Mixer Amplifier
Up to 5 microphones
4 selectable line-in input sources
Master volume, Bass, and Treble control for the output.
Overload, over temperature, and speaker short protection.
8 Ohm, and 70 / 100V output
AC or DC power in
2U height
19” rack or table mounted
4. Power Source
AC power source
The power supply is designed for 115 or 230VAC(
±
10%) 50/60 Hz voltage
DC power source
Battery-connection (24V DC)
When using external batteries, ground the amplifier via the screw terminal. ( Electrical
stability of the system will be improved by providing a good earth ground. ) When
connecting batteries , please ensure correct polarity.
NOTE:
the connection cable must be fitted with an in-line fuse, quick blow type F10A .
5. Connection
Mikrophone connection
Mic 1~5 inputs are balanced XLR .
The amplifier offers “Phantom Power” for the condenser microphone. There are phantom
power jumpers on the input board inside of the amplifier cabinet. The jumpers are
factory-set at OFF pins, which do not offer phantom power.
Set the jumper at ON pins to enable phantom power function.