SR806
Live Sound Mixer
STEREO CHANNELS
1. Left/Mono input - use this ¼” TRS input to connect a mono line
level device or the left output of a stereo line level device.
2. Right input - use this ¼” TRS input to connect the right output of a
stereo line level device.
3. Peak indicator - illuminates when the input signal is too high.
4. Gain control - allows you to match the input sensitivity of the
channel to your source. Ranges from -13dB to +25dB.
5. EQ - High band gain - a shelving filter centered at 12kHz, +/-15dB
of gain.
6. EQ - High Mid band gain - a peak filter centered at 2kHz, +/-15dB
of gain.
7. EQ - Low Mid band gain - a peak filter centered at 400Hz, +/-15dB
of gain.
8. EQ - Low band gain - a shelving filter centered at 80Hz, +/-15dB of
gain.
9. Sub/Aux - sends signal to the Sub/Aux buss, a pre-fade send
10. Mon 1 - a post-fade auxiliary send for foldback/monitor mixes
11. Mon 2 - a post-fade auxiliary send for foldback/monitor mixes
12. FX 1 - sends signal to the internal FX 1 processor
13. FX 2 - sends signal to the internal FX 2 processor
14. Balance - allows spatial placement, with a centre detent for equal
balance between left and right.
15. Mute button - toggles the channel on or off. The status LED will
illuminate red when the channel is muted.
16. Channel fader - sets the level of signal that is sent to the groups
or master buss.
17. Channel metering - displays the signal level, avoid illuminating the
peak LED for extended periods!
18. Group 1/2 select button - when depressed sends signal to buss
1/2
19. Group 3/4 select button - when depressed sends signal to buss
3/4
20. Master buss select - when depressed sends signal directly to the
master buss
21. PFL - Pre Fader Listen, allows you to monitor the signal before the
fader stage and set the gain levels correctly. the green status LED will
illuminate when PFL is active.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
8
