background image

WARNINGS AND WARRANTY INFORMATION

Unpacking: 

All Wharfedale Pro products are fully tested before leaving the factory. 

After unpacking

please inspect the unit

In the event of any noticed damage due to 

shipping, contact your dealer and the shipping provider immediately to file a shipping 
damage claim. Retain the shipping carton and all packaging material in case the unit 
needs to be returned.

1.

READ ALL INSTRUCTIONS

 carefully and become familiar with the features 

and functions of this product before operating it.

2.

RETAIN THESE INSTRUCTIONS

 for future reference.

3.

COMPLY WITH ALL WARNINGS

– All warnings and instructions for this 

product should be adhered to.

4.

USING AMPLIFIERS

– In order to avoid damage to equipment, it is advisable 

to establish and follow a routine for powering up and powering down a sound system. 
With all system components connected, turn on source equipment (mixers, signal 
processors, record and playback units, etc.) 

BEFORE

 powering up amplifiers. 

Transient voltages from powering up source equipment can damage speakers if 
amplifiers are turned on. Make sure that amplifier volumes are set to their minimum 
settings and power up any system amplifiers 

LAST

. It is recommended that all system 

components be allowed to stabilize for several seconds before any source signals are 
introduced or level setting adjustments are made. Similarly, when shutting systems 
down, turn all amplifiers off first, before powering down any other system components.

5.

CABLES

– Do not use shielded or microphone cables for connection between 

amplifiers and speakers. Use only approved speaker cables with proper connectors.

6.

CAUTION

– The S Series professional amplifiers are capable of generating 

very high sound pressure levels. Use care with operation to avoid exposure to 
excessive volume levels that can cause permanent hearing damage if operated to 
extremes.

7.

SERVICE –

There are no user serviceable parts inside this product. Users 

should not attempt to service this product. Potential dangerous voltages and shock 
hazards are present inside this product. Warranty nullification could result if this is 
attempted.

Wharfedale Pro Limited Warranty 

*

Wharfedale Pro 

SR

 Series amplifiers are warranted to the original purchaser against 

manufacturing or materials defects for a period of one year from the original date of 
purchase. Faults arising from misuse, unauthorized modifications or accidents are not 
covered under this warranty. No other warranty is expressed or implied. In the event of 
malfunction, contact your authorized Wharfedale Pro dealer or distributor for 
information.

*

Be aware that warranty details may differ from country to country. Contact your dealer 

or distributor for information.

2

S-SERIES  

Professional  Amplifiers

Содержание S-1000





















Отзывы: