30. 2 Track to Mix button:
31. 2 Track to Control Room / Phones:
32. Control Room Output Jacks:
33. Headphones:
34. Control Room Level Control:
35. MAIN MIX, ALT 3-4 switch:
36. Main Mix Faders:
37. ALT 3-4 Fader:
ALT 3-4 TO MIX:
39. 2TK LEVEL:
40. Effect Foot Switch:
Engaging this button allows the routing of the 2 Track Input (TAPE IN) to
the MAIN MIX. The playback volume is controlled by the
2TK LEVEL knob (#39).
Engaging this button allows the routing of the
2 Track Input (TAPE IN) to the CONTROL ROOM / PHONES section. The playback volume is controlled by
the 2TK LEVEL knob (#39).
The Control Room
outputs are designed to be connected to studio monitor
speakers for monitoring the recording process. This output
derives its selectable source signal from the either the MAIN
MIX, ALT 3-4, anything that is in SOLO mode or the 2TRK
input (TAPE IN). These outputs can also be used for a live
recording send.
This is a standard
Tip-Ring-Sleeve
(TRS) amplified stereo headphone output jack.
This knob controls
the level of both the stereo Control Room and Phones outputs.
These switches allow
for the monitoring of the MAIN MIX or the ALT 3-4 stereo
busses through the Control Room / Phones section.
These two faders control the
overall Left / Right stereo mix to the MAIN OUTPUT jacks.
This single stereo fader adjusts the
overall level of anything assigned to the ALT 3-4 buss. (Any
channel that is in MUTE mode).
When this button is engaged,
signals assigned to the ALT 3-4 buss (any channel that is in
MUTE mode) will be routed to the MAIN MIX buss (outputs).
This knob controls the playback level of
the signal coming into the 2 Track Input (TAPE IN).
This jack allows for the remote
on / off switching of the digital effects unit. A normally-
open , latching footswitch is required.
,,
,,
,,
1 4
/
,,
-3
- 2 4
- 1 8
+12
+ 6
-12
-6
-9
+3
0
.7.
38
36
37
35
34
33
40
32
39
31
30
R-1604FX & R-2004FX
R Series Mixers
