-3
- 2 4
- 1 8
+12
+ 6
-12
-6
-9
+3
0
21. EFX to MAIN / AUX:
22. Internal EFFECT Preset Select Knob:
23. EFFECT OFF / ON:
24. Level Meter:
25. SOLO ON LED:
26. Power ON LED:
27. Phantom Power Switch:
28. Phantom Power LED:
29. 2 Track Output:
Level controls for the EFX Return Jacks as described in #20.
This knob allows the selection of the desired digital
effect. The level of t
DELAY 1
CHORUS 2
DELAY 2
CHORUS 3
ROOM 1
PLATE REVERB 1
ROOM 2
PLATE REVERB 2
ROOM 3
PLATE REVERB 3
HALL 1
ROTARY SPEAKER
HALL 2
FLANGE
CHORUS 1
BYPASS
Engages and disengages the digital
effects signal.
The signal level of the MAIN MIX and
SOLO mode is displayed on the 10 segment LED bar-graph
meters. In SOLO mode, only the left meter will display the signal.
This meter is also used for setting the correct gain structure of
the mono input channels as described in item #4.
This LED lights up to indicate when any
channel SOLO button is engaged.
This LED lights when the power is on
for the mixer.
When engaged, this switch
applies 48Volts DC to all of the microphone inputs to allow the use
of condenser microphones. This switch should remain turned off
when only using
dynamic type microphones. Bring the MAIN
MIX faders all the way down when turning this switch on and off.
This LED lights when the
Phantom Power switch is on.
S
METERING
2 Track Output
,,
he chosen effect is controlled by the EFX RETURN knobs explained in #20 and #21. The
signal from the digital effects unit is disabled when a cable is connected to the EFX Return Jacks.
LIST OF AVAILABLE EFFECT
26
27
24
25
21
22
23
18
28
.6.
29
19
20
R Series Mixers
R-1604FX & R-2004FX
