6
© 2022 WhaleTeq All Rights Reserved
Notes for Installation
–
Reduce environmental noise interference
Note:
1. Shorter cables are recommended by bringing a closer connection between the
WECG400 and DUTs to reduce possible interference.
2. The metal plate's size should cover the WECG400 and the PC at least. It's unnecessary
to ground the metal plate itself.
•
Use short cables to connect the WECG400 and DUTs
1
.
•
Use shielded cables to avoid environmental radiation interference.
•
Avoid cables overlapping or crossing each other when testing.
•
Put a metal plate under the WECG400 and the PC,
then ground the WECG400 by connecting its GND
terminal to the metal plate.
2
USB
Connection
