Page 33 of 34
SECG 5.0 AIO | User Manual
If you need more in-depth calibration methods, please link to WhaleTeq's official website
to download the calibration file.
6
Trouble Shooting
Problem
Resolution
The software screen appears
SIMULATION MODE
Please make sure that the switch on the back of
SECG 5.0 AIO is switched to AIO mode.
After confirming that you have switched to AIO
mode, please restart SECG 5.0 AIO
7
Caution
➢
Before using products, use a grounded wrist strap or touch a grounded safely object
or a metal object, such as the power supply case, to avoid damaging them due to
static electricity.
➢
WhaleTeq does not recommend to connect test equipment with DUT to conduct
Electrostatic Discharge (ESD) test. This may cause unexpected damages to test
equipment. Please contact WhaleTeq for alternatives before ESD test.
➢
For operating “Firmware Update” feature, there are risks of losing data if improper
options are performed during the Firmware Update period.
➢
Warranty void if QC PASS label is removed or tampered with.
➢
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
➢
Do not place the device where it is difficult to disconnect the power cord. It must
be ensured that the user can operate the power cord at any time to quickly
disconnect it when needed. Connect properly and disconnect properly.
8
Ordering Information
Standard accessories
✓
SECG 5.0 AIO Host x 1
✓
Power supply x 1
✓
Compound terminal x 12
✓
USB Cable x 1
✓
Ground wire x 1
✓
Protection package x 1
