whaler 270 Outrage, Руководство пользователя

Страница: 45 / 88

2-17
Section 2 • General Information
270 Outrage
R
SHORE POWER RECEPTACLE
50 FT. (15.2 M) SHORE POWER
Ignition Shutdown Safety Switch
Fig. 2.17.1
1
2
3
4
1
2
3
NOTICE
This switch only works when used properly. The
decision of whether to use an ignition safety
switch or not rests entirely with you, the
operator.
Shore Power (Option)
If equipped, the optional 120V/30Amp shower power
capability provides the power to run all of your boats
electrical systems as well as charges your batteries.
Connection to shore power is made with the 50 ft.
weather tight electrical cord that secures to a screw-on
electrical outlet located under the port gunnel. For
operation and maintenace of the shore power option see
Section 3, page 3-17 of this manual.
4
(ATTACHED TO SWITCH)
Shore Power Hookup (Option)
Fig. 2.17.2
IGNITION SHUT-DOWN SWITCH
IGNITION SHUT-DOWNSWITCH CLIP,
LANYARD
IGNITION SHUT-DOWNSWITCH CLIP,
(ATTACH TO OPERATOR)
1
2
1
2
FWD
Docking, lifting and trailering
Cleat Locations
Fig. 2.17.3
From
Boat
From
Boat
From
Boat
(make loop and
rotate before pulling
over the horn)
(pull tight to
complete the
belaying knot)
(1)
(2)
(3)
(A)
Belaying Knot
Fig. 2.17.4
Docking
Your boat has (7) 8 inch cleats, one located at the anchor
roller on the bow, two located at the bow, two located
amidship and two located at the stern, forward of the
transom under the port & starboard gunnels. The cleats
are used to secure the boat to the dock. While loading/
unloading or mooring, please learn the proper way to
secure the boat and how best to use the mooring points
of your boat.
Figure 2.18.2 shows the correct method for tieing a
belaying knot, commonly used to secure a boat to a
dock. This knot will hold fast and is simple to release
when needed.