
12
Assembly Instructions for Table-top Console
17. Put the SUCTION CUPS (1) firmly into the top holes of the TOP SHELF FRAME (A).
TIP: If a SUCTION CUP resists insertion, try pressing down on the middle of the cup with the hex
wrench while twisting it clockwise into the hole.
18. Place the TOP GLASS (K) with the black side of the glass shelf down onto the SUCTION CUPS
(1). Make sure the top glass is properly centered.
NOTE: If the top glass is scratched, you can minimize the damage by using a BLACK marker and
filling in the scratched area from underneath.
19. Insert the SHELF SUPPORTS (11) into the desired holes on the SIDE PANELS (E and F) and
DIVIDER PANEL (G). Make sure you place the four SHELF SUPPORTS at the same level so the
shelf is not tilted. Tilt and install the ADJUSTABLE GLASS SHELVES (L) onto the SHELF
SUPPORTS (11).
SUCTION CUP
(6 used in this step)
①
K
L
1
11
11
SHELF SUPPORT
(8 used in this step)
⑪