12
Assembly Instructions
24.
Extend the two Hinge Arms that are pre-attached on one Door Panel (I) and attach them to the Hinge
Bases on the Right Side Panel (E). Loosen the bolt on the back of Hinge Base for an easy fit. Align and
insert the “U” slot on Hinge Arm under the bolt head on the back of Hinge Base. Make sure that both
door hinges engage and function properly. Tighten the bolt on the Hinge Base to lock the hinges in
place.
25.
Repeat the procedure to attach the other Door Panel (I) to the Left Side Panel (D).
26.
Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the
screws for a good fit.
27.
Attach one Handle (11) to the front side of each door with the provided Handle Bolt (12).
28.
Plug Cam Lock Covers (6) onto the visible Cams Locks to conceal the Cams.
D
E
I
I
1
I
E
E
I
I
12
11
6