Step 3 Lower grill into cutout in the countertop.
Step 4 Attach the mounting brackets (x2) with the screws provided.
Step 5 Slide the mounting brackets upward to underside of the countertop and tighten the mounting bracket screws.
8.iii Electrical Wiring
This appliance
must be
installed by a qualified electrician.
•
WARNING:
Fire hazard. Wiring
must comply
with applicable electrical standards and include a properly sized
fuse or circuit breaker. Improper wiring can cause a fire resulting in injury or death.
•
Switch off the power prior to making connections.
•
Suggested wiring information is given as a guide only. For full information, refer to the USCG regulations for
marine applications and wiring gauges, connectors and fuse protection.
Electrical Requirements
•
Ensure installation is in line with Title 33 Code of Federal Regulations, Part 183, Subpart 1, Section 183.435.
•
Appliance
must be
installed in accordance with the installation instructions and comply with any regulations in
the country where the appliance is installed.
NOTE:
All wiring within the junction box
must be
made by a qualified electrician
8.iv. FITTING THE CIRCUIT BREAKER
The circuit breaker is required in order to protect the appliance from serious damage, therefore this
must be
fitted prior
to appliance use. For individual requirements see breaker size column in the table above.
Figure 3 - Securing the Grill
Model
Voltage (A.C.)
Rating
Breaker Size (Amps)
Min. Wire Size
1850-1104
120V
1.8KW
20
14 AWG
1850-1404
220 - 240V
2.4KW
15 (Dual pole)
14 AWG
Figure 4 - Wiring Diagram
Step 3
Step4
Step 5
